TrendVision TUBE

Processor
• ARM Cortex A9
— Up to 800 MHz
— 32 KB L1 I-cache, 32 KB L1 D-cache
— 256 KB L2 cache
Video Encoding
• H.264 baseline profile
• H.264 main profile
• H.264 high profile
• MPEG4 SP
• MJPEG/JPEG baseline
Video Encoding Performance
• 16-megapixel maximum resolution for H.264 encoding
• Real-time H.264&JPEG encoding of multiple types of streams:
— 1080p@30 fps+D1@30 fps+CIF@30 fps+QVGA@30 fps+1080p JPEG snapshot 1 fps
— 720p@60 fps+D1@30 fps+CIF@30 fps+QVGA@30 fps+720p JPEG snapshot 1 fps
•JPEG snapshot of 3-megapixel@15 fps to 16-megapixel @2 fps
• MPEG4 SP encoding, a maximum of 960H resolution
• CBR, VBR, and ABR, ranging from 16 kbit/s to 40 Mbit/s
• Encoding frame rate, ranging from 1/16 frame/s to 60 frame/s
• ROI
• Color-to-gray
Intelligent Video Analysis
• Integrated intelligent analysis acceleration engine, supporting motion detection, boundary guard, face detection, and video diagnosis
Video and Graphic Processing
• De-interlace pre-processing, image enhancement, edge enhancement, and 3D denoise
• Anti-flicker processing for output videos and graphics
• 1/16x to 8x video scaling
• 1/24x to 42x image scaling
• OSD overlay pre-processing for eight areas during encoding
• Hardware graphics overlay post-processing for the videos at two layers (video layer and graphics layer 1)
ISP
• Adjustable 3A function
• WDR, highlight compensation, backlight compensation, gamma correction, and color enhancement
• Defect pixel correction, denoise, and digital image stabilizer
• ISP APIs for adjusting the ISP effect
• PC sensor and ISP tuning tools Audio Codec
• Voice codec in compliance with multiple protocols by using software
• G.711, ADPCM, and G.726 encoding
• Echo cancellation
Security Engine
• AES, DES, and 3DES encryption and decryption algorithms by using hardware
• Digital watermark
Video Interfaces
• Input
— 8-/10-/12-/14-/16-bit RGB Bayer input, a maximum of 150 MHz clock frequency
— BT.601
— BT.656
— BT.1120, supporting the embedded synchronization and external synchronization modes
— Compatibility with mainstream CMOSs provided by SONY, Aptina, OV, and Altasens
— Compatibility with HD CCDs provided by Sharp and Panasonic
— Compatibility with the 960H CCD sensor
— Video inputs of 16-megapixel@2 fps, 5-megapixel@5 fps, 3-megapixel@15 fps, 1080p@30 fps or 720p@60 fps
— Two input interfaces. Only one has the ISP function, and dual-sensor inputs are supported.
• Output
— 1-channel CVBS output and one BT.656 output interface
— One BT.1120 VO interface for connecting to the external HDMI or SDI interface, 1080p@30 fps
Audio Interfaces
• I2Sx2
• Integrated audio codecx1, 8- or 16-bit voice inputs and outputs
• Connection to the external audio codec, 8-or 16-bit voice inputs and outputs
Peripheral Interfaces
• UARTx4
• IRx1, I2Cx1, SPIx1 (master/slave mode),GPIOs, and PWMx6
• PCIe 1.1×1, EP and RC
• SDIO 2.0×2, maximum capacity of 32 GB
• USB 2.0 Hostx2, hub
• GMACx1, supporting RGMII and MII modes, 10 Mbit/s or 100 Mbit/s full-duplex or half-duplex mode, and 1000 Mbit/s full-duplex mode
External Memory Interfaces
• DDR2 or DDR3 SDRAM
— 32-/16-bit DDR2/DDR3@500 MHz
— Maximum capacity of 1 GB
• SPI/NOR flash
— 1-, 2-, or 4-bit SPI/NOR flash
• NAND flash
— 8 bits
— SLC, MLC, and 1-, 4-, 8-, or 24-bit ECC
— Components with 8 GB capacity or larger
• NOR flash or NAND flash boot mode
SDK
• SDK based on Linux 2.6.35
• High-performance H.264 PC decoding library
Physical Specifications
• Power consumption
— Typical power of 1200 mW
— Multiple-level power-saving mode
• Operating voltage
— 1.0 V core voltage
— 3.3 V I/O voltage, 2.5 V PCIE voltage, and 5 V tolerance voltage
— 1.5 V or 1.8 V DDR2/DDR3 SDRAM voltage
• Ambient temperature
– 20°C (–4°F ) to +70°C (+158°F)
• Package
– 416-pin FC-CSP
• 0.65 mm ball pitch and 15 mm x 15 mm body size