kreat0r:Из под root-а, после "usb_modeswitch -v 0x12d1 -p 0x14fe ..." ?
sudo -i
usb_modeswitch -v 0x12d1 -p 0x14fe -M "55534243123456780000000000000011060000000100000000000000000000"
Looking for default devices ...
Found devices in default mode, class or configuration (1)
Accessing device 005 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x01 (out) and 0x81 (in)
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage" )
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Setting up communication with interface 0 ...
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Error resetting endpoint: -19
Resetting message endpoint 0x01
Error resetting endpoint: -19
Device is gone, skipping any further commands
-> Run lsusb to note any changes. Bye.
ls /dev/ttyUSB*
ls: невозможно получить доступ к /dev/ttyUSB*: Нет такого файла или каталога
kreat0r:Для сохранения настроек: at&w
Send:AT^SYSCFG?
Recieve: AT^SYSCFG?
Recieve: ^SYSCFG:2,2,3FFFFFFF,1,2
Recieve: OK
Send:AT^SYSCFG=2,2,3FFFFFFF,2,4
Recieve: AT^SYSCFG=2,2,3FFFFFFF,2,4
Recieve: OK
Send:at&w
Recieve: at&w
Recieve: ERROR
Подскажите, чем можно вводить команды для модема под Линукс. AT-команды я ввожу через Huawei Modem Terminal из-под винды, может дело в этом?