Street Guardian SG9665GC

Задумался о подключении регистратора к источнику постоянного питания чтобы съемка велась круглосуточно. Однако parking mode отсутствует в этой модели, а карта памяти на 32 ГБ вмещает только около 8 часов видео. Т.е. если машину на парковке стукнут в начале рабочего дня, то к вечеру видео ДТП будет затерто новым видеороликом.
Можно включить датчик движения чтобы запись включалась только когда что-то происходит в поле зрения, однако есть сомнения, что он будет нормально работать во время движения и ночью.
Подскажите как поступить?
alexsoll, я вижу у вас подключен Magic Pro. Оставляли ли вы надолго машину с включенным регистратором? На сколько дней хватало заряда аккумулятора?
И еще вопрос: почему в рекомендуемых настройках WDR off?

if any technical question please let me know, I need to use Google to translate but anything that's not clear I can ask Alexsoll to help, he is our distributor in CIS

На сегодня, оптимальна и более стабильна всё-таки мартовская прошивка с отключенным ДД.
Пару дней покатался и оставил именно ее.

mr_sharp:

Мне Pier28 тоже ее рекомендовал

Да, Jon (Pier28) тоже с интересом читает эту ветку, в ближ. время и Niko из Ирландии подтянется.

https://forum.dashcamtalk.com/members/?type=likes

NikolaikiN:

Привет всем !
Постараюсь тут отвечать по-возмозности.
Пользуюсь translit.net, с грамматикой у меня не всегда лады, подзабываю уже, так что "прошу понять и простить".

По поводу грамматики не стоит переживать.
Welcome!

mr_sharp:

jokiin, welcome to the forum! It's very nice to see you here.

I know you replied at dashcamtalk.com that parking mode cannot be implemented because SDK lacks pre-buffered recording feature. On the other hand, there is a motion detection feature available in the dash cam. I don't want to enable it when I drive, but I'd want to turn in on when the car is parked (and dash cam is hardwired).
Here is an idea: is there a way to introduce a new feature in the firmware to enable motion detection when vehicle's engine is shut down, and disable it when engine is started? It would help to use motion detection to record activities in the view of the camera and make sure older video are not overridden by the time I get back to my car. I know that you need to have a trigger for enabling/disabling this feature, but maybe voltage changes from the power source can serve that purpose?

Thanks!

Добавлено спустя 4 минуты 34 секунды

jokiin, one more question, but not really related to the topic. How do you guys develop firmware for the dash cam? I mean programming language, tools, SDKs and so on. Can you share that knowledge?

Hi, thanks for your questions

We can't use voltage as a trigger as the camera is 5V powered, your battery can change by several volts when you start but the change at the 5V end is too small to measure, G-Sensor is another method to determine if car is parked or moving but does need a lot of work to get that right, something to consider

We are still doing some work with motion detect though and are looking to improve it, most motion detect for cameras without prebuffer stops and starts recording which can be quite slow and miss a lot of things, ours pauses and resumes recording which is quicker, we are adding some adjustable sensitivity and timeout adjustments in the firmware, it will probably take some time to get the best results but it is something we are working on

The SDK and tools come from Novatek, not something we can share though sorry

jokiin, thanks for your response.
Maybe GPS position can be used as a trigger then? When a car is parked, its location stays the same, but when it moves, the location changes.
Otherwise the only option to extend recording time is to get a larger memory card.

NikolaikiN, jokiin, Pier28,
I'm really amazed how you guys support your customers internationally. Great job!

mr_sharp:

jokiin, thanks for your response.
Maybe GPS position can be used as a trigger then? When a car is parked, its location stays the same, but when it moves, the location changes.
Otherwise the only option to extend recording time is to get a larger memory card.

G-Sensor is probably more accurate for determining the situation, GPS is subject to signal availability so car parks, tunnels etc can change the results and make the process more difficult, a lot is subject to what's possible in the SDK, we have other models we are working on now that will be more flexible for this

mr_sharp:

I'm really amazed how you guys support your customers internationally. Great job!

we're not trying to be bigger than others, just better, some manufacturers are happy to boast about how many products they sell but the service isn't always so great from the big guys

mr_sharp:

do you recommend turning WDR feature on or off? Are there any benefits of turning it on?

1. Рекомендованные настройки от программиста - сбросить настройки на заводские.
2. Рекомендованные настройки по результатам тестов и отзывам пользователей - в шапке.
3. Тут уж на вкус и цвет... Вы сами можете экспериментировать с настройками, для получения желаемого результата.

WDR on is good for my car too.