Ни с того ни с сего пропал wi-fi (и лампочка не горит). Ноутбук и компьютер пишут, что беспроводных сетей не обнаружено. Пробовал сбрасывать на заводские настройки - не помогло. Подключил и настроил через LAN - работает (модем без wi-fi). В настройках модема - wi-fi включен. Что еще можно попробовать, или это уже чисто гарантийный случай?
Логи:
Jan 1 12:00:11 cfgmgr(sar): Could not get oam_ping_interval from boot loader env
Jan 1 12:00:11 cfgmgr(sar): Trying to retreive the value from Configuration
Jan 1 12:00:11 cfgmgr(sar): oamPingInterval(20)(20)
Jan 1 12:00:11 cfgmgr(ap): AP Acquiring Lock
Jan 1 12:00:12 cfgmgr(resolver): stat successfull for /etc/resolv.conf.
Jan 1 12:00:12 cfgmgr(resolver): Resolver Polling Timer Started succesfully.
Jan 1 12:00:12 cfgmgr(sar): DSL Polling Timer Started succesfully.
Jan 1 12:00:12 cfgmgr(fdb): Firewall NAT service started
Jan 1 12:00:12 cfgmgr(ap): AP REPORT LOCK ACQUIRED
Jan 1 12:00:12 cfgmgr(ap): wlan_handle_load_event - Acquired Lock
Jan 1 12:00:13 cfgmgr(ap): MAC address : 00:14:2b:13:85:e0
Jan 1 12:00:13 cfgmgr(lanbridge0): Bridge Created: br0
Jan 1 12:00:15 cfgmgr(lanbridge1): Bridge Created: br1
Jan 1 12:00:17 cfgmgr(lanbridge2): Bridge Created: br2
Jan 1 12:00:18 cfgmgr(ap): WPA Authenticator Started
Jan 1 12:00:18 cfgmgr(lanbridge3): Bridge Created: br3
Jan 1 12:00:21 cfgmgr(lanbridge0): Bridge Interface Added: eth0
Jan 1 12:00:22 cfgmgr(lanbridge0): Bridge Interface Added: eth1
Jan 1 12:00:24 cfgmgr(lanbridge0): Bridge Interface Added: eth2
Jan 1 12:00:25 cfgmgr(lanbridge0): Bridge Interface Added: eth3
Jan 1 12:00:27 cfgmgr(ap): Retrieving EEPROM image file nvs_0a015d39614c161d.bin from TFTP Server 192.168.1.22 CP .....
Jan 1 12:00:57 cfgmgr(ap): ERROR: TFTP of file : nvs_0a015d39614c161d.bin failed
Jan 1 12:00:57 cfgmgr(ap): Error: Failed to get a valid EEPROM Image. AP is DOWN
Jan 1 12:00:57 cfgmgr(ap): NVS_TFTP_LOAD is enabled to download the correct EEPROM image during next boot. Set TFTP Server Address using IPA_SVR env variable
Jan 1 12:00:57 cfgmgr(ap): Setting bootloader env NVS_TFTP_LOAD to 1
Jan 1 12:00:57 cfgmgr(ap): AP Releasing Lock
Jan 1 12:00:58 cfgmgr(sar): DSL Carrier is up
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_default oamPing(0.35)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_default oamPing(0.32)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_default oamPing(0.40)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_default oamPing(0.36)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_default oamPing(0.38)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_default oamPing(0.96)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_search oamPing(0.35)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_search oamPing(8.35)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_search oamPing(0.43)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_search oamPing(0.51)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_search oamPing(0.59)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_search oamPing(8.43)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_search oamPing(8.51)result(2)
Jan 1 12:00:58 cfgmgr(sar): auto_vcc_search oamPing(8.59)result(2)
Jan 1 12:12:32 webcm: Got group error |Bad username/password|
Jan 1 12:30:11 cfgmgr(pppoe-106): Valid Configuration Tree
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Apply Transaction
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Current State = 2
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Apple Code = 1
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE ReStart Flag = 0
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Relaunch = 0
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Apply Message
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Current State = 2
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Relaunch Flag = 0
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE AFTER Apply Transaction
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Current State = 2
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Apple Code = 0
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE ReStart Flag = 0
Jan 1 12:30:11 cfgmgr(pppoe-106): PPPoE Relaunch = 0
Jan 1 12:30:11 cfgmgr(pppoe-106): RE-PPPoE Timer Apply...
Jan 1 12:30:14 pppd[329]: pppd 2.4.4 started by root, uid 0
Jan 1 12:30:14 pppd[329]: Unexpected packet: Ether addr: 00:1c:f6:9d:68:1a (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x002c (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 88 ee 00 10 PPPoE tag: type=0101 length=0000 (Service nam
Jan 1 12:30:14 pppd[329]: Got connection: 7999
Jan 1 12:30:14 cfgmgr(pppoe-106): New PPP_ID: 0x7999
Jan 1 12:30:14 cfgmgr(pppoe-106): Received pppoe server mac: 0x00-1c-0f-28-64-1a
Jan 1 12:30:14 pppd[329]: Saved Session ID: 0
Jan 1 12:30:14 pppd[329]: AC MAC address: 00-1c-0f-28-64-1a
Jan 1 12:30:14 pppd[329]: Connect: ppp0 {--} nas0
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE Apply Transaction
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE Current State = 3
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE Apple Code = 2
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE ReStart Flag = 0
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE Relaunch = 0
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE AFTER Apply Transaction
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE Current State = 3
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE Apple Code = 0
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE ReStart Flag = 0
Jan 1 12:30:21 cfgmgr(pppoe-106): PPPoE Relaunch = 0
Jan 1 12:30:21 cfgmgr(pppoe-106): RE-PPPoE Timer Apply...
Jan 1 12:30:34 pppd[329]: CHAP authentication succeeded
Jan 1 12:30:34 cfgmgr(pppoe-106): PPPoE Connect with IP Address 93.84.99.135
Jan 1 12:30:34 cfgmgr(pppoe-106): PPPoE Connection Successfully Established
Jan 1 12:30:34 cfgmgr(pppoe-106): Renew PPPoE Session ID: 0x7999
Jan 1 12:30:34 cfgmgr(pppoe-106): sys_send_event - pppoe up
Jan 1 12:30:34 cfgmgr(pppoe-106): PPPoE Connect with Gateway IP Address: 82.209.253.222
Jan 1 12:30:35 pppd[329]: local IP address 93.84.99.135
Jan 1 12:30:35 pppd[329]: remote IP address 82.209.253.222
Jan 1 12:30:35 pppd[329]: primary DNS address 82.209.253.4
Jan 1 12:30:35 pppd[329]: secondary DNS address 82.209.253.2
Jan 1 12:30:35 syslog: dproxy force reload config.
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE Apply Transaction
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE Current State = 6
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE Apple Code = 2
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE ReStart Flag = 0
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE Relaunch = 0
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE AFTER Apply Transaction
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE Current State = 6
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE Apple Code = 0
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE ReStart Flag = 0
Jan 1 12:30:46 cfgmgr(pppoe-106): PPPoE Relaunch = 0
Jan 1 12:30:46 cfgmgr(pppoe-106): RE-PPPoE Timer Apply...
Jan 1 12:31:00 cfgmgr(logic): Saving on Apply
Jan 1 12:35:37 cfgmgr(eth0): ValidSettings key port4
Jan 1 12:35:37 cfgmgr(eth0): ValidSettings key port3
Jan 1 12:35:37 cfgmgr(eth0): ValidSettings key port2
Jan 1 12:35:37 cfgmgr(eth0): ValidSettings key port1
Jan 1 12:46:38 cfgmgr(logic): Saving on Apply
Jan 1 12:47:28 webcm: Timeout on response: ap:status/wireless_statistics
Jan 1 12:48:28 webcm: Timeout on response: ap:status/wireless_statistics
Jan 1 12:49:22 cfgmgr(ap): ERROR:Unable to open /proc/wlan/hal/fwVer
Jan 1 12:49:22 cfgmgr(ap): ERROR:Unable to open /proc/wlan/production/version
Jan 1 12:51:43 webcm: Got group error |Bad username/password|
Jan 1 16:27:52 cfgmgr(ap): Restarting AP.....
Jan 1 16:27:52 cfgmgr(ap): TERMINATE AP CALLED.........
Jan 1 16:28:55 pc: Lost SIGCHLD, process rmmod(3241) died
Jan 1 16:28:55 cfgmgr(ap): AP Acquiring Lock
Jan 1 16:28:55 cfgmgr(ap): AP REPORT LOCK ACQUIRED
Jan 1 16:28:55 cfgmgr(ap): wlan_handle_load_event - Acquired Lock
Jan 1 16:28:55 cfgmgr(ap): MAC address : 00:14:2b:13:85:e0
Jan 1 16:28:57 cfgmgr(ap): WPA Authenticator Started
Jan 1 16:29:00 cfgmgr(ap): Retrieving EEPROM image file nvs_0a015d39614c161d.bin from TFTP Server 192.168.1.22 CP .....
Jan 1 16:29:30 cfgmgr(ap): ERROR: TFTP of file : nvs_0a015d39614c161d.bin failed
Jan 1 16:29:30 cfgmgr(ap): Error: Failed to get a valid EEPROM Image. AP is DOWN
Jan 1 16:29:30 cfgmgr(ap): NVS_TFTP_LOAD is enabled to download the correct EEPROM image during next boot. Set TFTP Server Address using IPA_SVR env variable
Jan 1 16:29:30 cfgmgr(ap): Setting bootloader env NVS_TFTP_LOAD to 1
Jan 1 16:29:30 cfgmgr(ap): AP Releasing Lock
Jan 1 16:31:05 cfgmgr(logic): Saving on Apply
Jan 1 16:32:06 cfgmgr(ap): Restarting AP.....
Jan 1 16:32:06 cfgmgr(ap): TERMINATE AP CALLED.........
Jan 1 16:32:34 cfgmgr(ap): AP is disabled
Jan 1 16:32:34 pc: Lost SIGCHLD, process rmmod(4201) died
Jan 1 16:32:54 cfgmgr(ap): AP Acquiring Lock
Jan 1 16:32:54 cfgmgr(ap): AP REPORT LOCK ACQUIRED
Jan 1 16:32:54 cfgmgr(ap): wlan_handle_load_event - Acquired Lock
Jan 1 16:32:54 cfgmgr(ap): MAC address : 00:14:2b:13:85:e0
Jan 1 16:33:00 cfgmgr(logic): Saving on Apply
Jan 1 16:33:01 cfgmgr(ap): WPA Authenticator Started
Jan 1 16:33:03 cfgmgr(ap): Retrieving EEPROM image file nvs_0a015d39614c161d.bin from TFTP Server 192.168.1.22 CP .....
Jan 1 16:33:33 cfgmgr(ap): ERROR: TFTP of file : nvs_0a015d39614c161d.bin failed
Jan 1 16:33:33 cfgmgr(ap): Error: Failed to get a valid EEPROM Image. AP is DOWN
Jan 1 16:33:33 cfgmgr(ap): NVS_TFTP_LOAD is enabled to download the correct EEPROM image during next boot. Set TFTP Server Address using IPA_SVR env variable
Jan 1 16:33:33 cfgmgr(ap): Setting bootloader env NVS_TFTP_LOAD to 1
Jan 1 16:33:33 cfgmgr(ap): AP Releasing Lock
Jan 1 16:33:33 webcm: WebCM: Error communication with Config Manager
Jan 1 16:34:14 cfgmgr(ap): Restarting AP.....
Jan 1 16:34:14 cfgmgr(ap): TERMINATE AP CALLED.........
Jan 1 16:35:18 pc: Lost SIGCHLD, process rmmod(6104) died
Jan 1 16:35:18 cfgmgr(ap): AP Acquiring Lock
Jan 1 16:35:18 cfgmgr(ap): AP REPORT LOCK ACQUIRED
Jan 1 16:35:18 cfgmgr(ap): wlan_handle_load_event - Acquired Lock
Jan 1 16:35:18 cfgmgr(ap): MAC address : 00:14:2b:13:85:e0
Jan 1 16:35:19 cfgmgr(ap): WPA Authenticator Started
Jan 1 16:35:22 cfgmgr(ap): Retrieving EEPROM image file nvs_0a015d39614c161d.bin from TFTP Server 192.168.1.22 CP .....
Jan 1 16:35:52 cfgmgr(ap): ERROR: TFTP of file : nvs_0a015d39614c161d.bin failed
Jan 1 16:35:52 cfgmgr(ap): Error: Failed to get a valid EEPROM Image. AP is DOWN
Jan 1 16:35:52 cfgmgr(ap): NVS_TFTP_LOAD is enabled to download the correct EEPROM image during next boot. Set TFTP Server Address using IPA_SVR env variable
Jan 1 16:35:52 cfgmgr(ap): Setting bootloader env NVS_TFTP_LOAD to 1
Jan 1 16:35:52 cfgmgr(ap): AP Releasing Lock
Jan 1 16:36:49 webcm: Timeout on response: ap:status/wireless_statistics
Jan 1 16:37:22 cfgmgr(eth0): ValidSettings key port4
Jan 1 16:37:22 cfgmgr(eth0): ValidSettings key port3
Jan 1 16:37:22 cfgmgr(eth0): ValidSettings key port2
Jan 1 16:37:22 cfgmgr(eth0): ValidSettings key port1
Jan 1 17:35:12 cfgmgr(sar): DSL Carrier is down
Jan 1 17:35:42 cfgmgr(sar): DSL Carrier is up
Jan 1 17:35:42 cfgmgr(sar): auto_vcc_default oamPing(0.35)result(2)
Jan 1 17:35:42 cfgmgr(sar): auto_vcc_default oamPing(0.32)result(2)
Jan 1 17:35:42 cfgmgr(sar): auto_vcc_default oamPing(0.40)result(2)
Jan 1 17:35:42 cfgmgr(sar): auto_vcc_default oamPing(0.36)result(2)
Jan 1 17:35:42 cfgmgr(sar): auto_vcc_default oamPing(0.38)result(2)
Jan 1 17:35:42 cfgmgr(sar): auto_vcc_default oamPing(0.96)result(2)
Jan 1 17:35:42 cfgmgr(sar): auto_vcc_search oamPing(0.35)result(2)
Jan 1 17:35:42 cfgmgr(sar): auto_vcc_search oamPing(8.35)result(2)
Jan 1 17:35:43 cfgmgr(sar): auto_vcc_search oamPing(0.43)result(2)
Jan 1 17:35:43 cfgmgr(sar): auto_vcc_search oamPing(0.51)result(2)
Jan 1 17:35:43 cfgmgr(sar): auto_vcc_search oamPing(0.59)result(2)
Jan 1 17:35:43 cfgmgr(sar): auto_vcc_search oamPing(8.43)result(2)
Jan 1 17:35:43 cfgmgr(sar): auto_vcc_search oamPing(8.51)result(2)
Jan 1 17:35:43 cfgmgr(sar): auto_vcc_search oamPing(8.59)result(2)
Jan 1 17:35:43 cfgmgr(pppoe-106): PPPD was Properly Stopped. Current State=7
Jan 1 17:35:43 cfgmgr(pppoe-106): PPPD Restart Filter = 0
Jan 1 17:35:47 pppd[6247]: pppd 2.4.4 started by root, uid 0
Jan 1 17:35:47 pppd[6247]: Sending PADT for 7999 before starting new discovery
Jan 1 17:35:47 pppd[6247]: Server MAC is: 00-1c-0f-28-64-1a
Jan 1 17:35:47 pppd[6247]: Unexpected packet: Ether addr: 00:1c:0f:28:64:1a (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x002a (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 88 ee 00 10 PPPoE tag: type=0101 length=0000 (Service nam
Jan 1 17:35:48 cfgmgr(pppoe-106): Saving PPPoE Session ID: 0x2b99
Jan 1 17:35:48 cfgmgr(pppoe-106): Received pppoe server mac: 0x00-1c-f6-9d-68-1a
Jan 1 17:35:48 pppd[6247]: Got connection: 2b99
Jan 1 17:35:48 pppd[6247]: Saved Session ID: 0
Jan 1 17:35:48 pppd[6247]: AC MAC address: 00-1c-f6-9d-68-1a
Jan 1 17:35:48 pppd[6247]: Connect: ppp0 {--} nas0
Jan 1 17:36:08 pppd[6247]: CHAP authentication succeeded
Jan 1 17:36:08 cfgmgr(pppoe-106): PPPoE Connect with IP Address 93.84.108.155
Jan 1 17:36:08 cfgmgr(pppoe-106): PPPoE Connection Successfully Established
Jan 1 17:36:08 cfgmgr(pppoe-106): sys_send_event - pppoe up
Jan 1 17:36:08 cfgmgr(pppoe-106): PPPoE Connect with Gateway IP Address: 82.209.253.219
Jan 1 17:36:08 pppd[6247]: local IP address 93.84.108.155
Jan 1 17:36:08 pppd[6247]: remote IP address 82.209.253.219
Jan 1 17:36:08 pppd[6247]: primary DNS address 82.209.253.4
Jan 1 17:36:08 pppd[6247]: secondary DNS address 82.209.253.2
Jan 1 17:36:08 syslog: dproxy force reload config.